A zasto radite update sa kiesom kada sa odinom se to napravi za 2 minute i nikakvih problema
evo instrukcija i imam hrvatski jezik i sve
IMPORTANT NOTES, MUST READ FIRST:
- IF 3-BUTTON-COMBO DOES NOT WORK ON YOUR PHONE, FIX IT BEFORE FLASHING! FIX IS THERE:
http://forum.xda-developers.com/showthread.php?t=785201
- IF PHONE STUCKS AT ANIMATED "S", DO A FACTORY RESET/DATA WIPE FROM RECOVERY!
- IF YOU HAVE FORCE CLOSES, DO A FACTORY RESET/DATA WIPE FROM RECOVERY!
- PLEASE UPDATE KIES TO NEWEST VERSION BEFORE FLASHING!
- MAKE A BACKUP OF YOUR /efs FOLDER, JUST IN CASE
- DO NOT RESTORE APPDATA WITH TITANIUM BACKUP IF YOU UPGRADE FROM 2.1 TO JPM
- THIS FIRMWARE IS FOR THE GALAXY-S I9000 - DO NOT FLASH ONTO OTHER GALAXY S SPIN-OFFS
- IF IN DOUBT, REMOVE ANY LAG FIX BEFORE FLASHING
Thanks to Aery, whose guide I've used as a base, and samfirmware.com for the firmwares!
------------------------------------------------------------------
HOWTO UPGRADE TO JPM USING ODIN:
Download these files:
I9000XXJPM:
http://www.multiupload.com/6T0NAZKKR0
I9000XXJM8:
http://www.multiupload.com/FCYKST8QBO
Odin 1.3 & 803.pit:
http://www.multiupload.com/4JLU4QHUV7
Galaxy S 512 pit:
http://www.multiupload.com/I5WICSBFJ1
The password for these files is samfirmware.com if asked.
Before you flash JPM, samfirmware strongly recommend first flashing to JM8 with 512.pit, i.e. android 2.1.
If you're already on JM8, you can skip step 2. If you're on JPK and you flashed with 512.pit, you can skip step 2. If you flashed previously with 803.pit, you should install JM8 first, i.e. follow step 2. If in doubt, don't skip step 2!
------------------------------------------------------------------
Step 1:
- Backup your data and apps. Really. Your internal and external SD card should be fine, but back them up too, just in case.
- Extract all rar files, using the password samfirmware.com
- I use 7zip for extracting, but if you prefer another app, go for it.
- you should at least have the following files:
* JPM_JPM_U_JPM.tar
* CODE_I9000XWJM8.tar
* MODEM_I9000XXJM4.tar
* Odin3 v1.3.exe
* s1_odin_20100803.pit
* s1_odin_20100512.pit
- If not, you missed one!
------------------------------------------------------------------
Step 2 - flash JM8:
- Open Odin
- Enable Re-Partition Checkbox
- Choose "s1_odin_20100512.pit" as PIT
- Choose "CODE_I9000XWJM8.tar" as PDA
- Choose "MODEM_I9000XXJM4.tar" as PHONE
- Leave CSC blank
- Start Phone in Download-Mode (see image at bottom)
- Connect Phone via USB
- "Start" Flash using odin
- Goto Recovery mode (see image at bottom) and do Factory Reset / Data Wipe
- Reboot, and wait for full start up to desktop. Unplug phone from USB.
- Close Odin.
------------------------------------------------------------------
Step 3 - Flash JPM:
- Open Odin
- make sure you UNTICK Re-Partition Checkbox (which is the default choice)
- Choose "s1_odin_20100803.pit" as PIT
- Choose "JPM_JPM_U_JPM.tar" as PDA
- Leave PHONE blank
- Leave CSC blank
- Start Phone in Download-Mode (see image at bottom)
- Connect Phone via USB
- "Start" Flash using odin
- Goto Recovery mode (see image at bottom) and do Factory Reset / Data Wipe
- Reboot, and wait for full start up. Unplug phone from USB.
- Close Odin.
------------------------------------------------------------------
Congrats! You now have Froyo XXJPM!
evo to je najnoviji froyo i radi bez greske
NE ODGOVARAM ZA NIKAKVE PROBLEME AKO SE NESTO DOGODI.SAMO PRENOSIM LINK I TO JE TO.
cini se tesko po instrukcijama ali je jako lagano
obavezno skinut sve fileove koji su navedeni u instrukcijama
POZDRAV
Al i meni je sad zao zasto sam to napravila, al znas ono ... znatizelja je ubila macku 
Linearni mod
